E3 I/O Module-32 Mixed Inputs/Outputs

$1,230.00

SKU: E3-MIX20884-1 Categories: , , ,

Description

Isolated Discrete Input Channels 

Channels: 1-4 

Voltage range: 5 – 30 VDC 

Guaranteed ON voltage: 3.0 VDC 

Guaranteed OFF voltage: 1.5 VDC 

Guaranteed OFF current: 1 mA DC 

Input resistance (@ 24 VDC): 2.5K Ohms 

Input current (@ 24 VDC): 9.6 mA 

Common mode and channel-to-channel Isolation: 150 VDC 

Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate) 

Fastest response: 1 ms (400 Hz. max. counting rate) 

Special fast counting rate: Up to 50 KHz 

Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting 

Non-Isolated Discrete Input Channels 

Channels: 5-12 

Voltage range : 10 – 30 VDC 

Guaranteed ON voltage: 9.0 VDC 

Guaranteed OFF voltage: 5.0 VDC 

Guaranteed OFF current: 2 mA DC 

Input resistance: 10K Ohms 

Input current (@ 24 VDC) 3 mA 

Input Polarity: Sourcing (apply power to active) or sinking (ground closure) on 8 inputs 

Input Protection: High Impedance with overvoltage protection 

Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate) 

Fastest response: 1 ms (400 Hz. max. counting rate) 

Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting

Non-Isolated Combination Discrete Input Channels 

Channels: 13-20 

Channel Type: Discrete input and discrete output combination channel (software selectable) 

Voltage range : 10 – 30 VDC 

Guaranteed ON voltage: 9.0 VDC 

Guaranteed OFF voltage: 5.0 VDC 

Guaranteed OFF current: 2 mA DC 

Input resistance: 10K Ohms 

Input current (@ 24 VDC) 3 mA 

Input Protection: High Impedance with overvoltage protection 

Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate) 

Fastest response: 1 ms (400 Hz. max. counting rate) 

Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting

Discrete Output Channels 

  • Output voltage range 10-30 VDC 

  • Max. output power: 0.6A per channel, 4.8A max 

  • Max. off state leakage: 0.01 mA (less than 10 uA) 

  • Short circuit protection, self-reset fuses (trip above 1.5 Amp) 

  • Min. load: 1 mA 

  • Inrush current: 5 Amps (100 ms surge) 

  • Typical on resistance: 0.3 Ohms (Drop 0.3 VDC @ 1 Amp) 

  • All channels Scan rate: 1 ms 

Analog Input Channels 

  • Analog Input Range: 4-20 mA 

  • A/D resolution 16 bits (0.003%) 10 bits (fast option) 

  • Full scale accuracy: +/- 0.02% (at 20 °C, 16 bit mode) 

  • Temperature coefficient +/- 50 ppm per °C (span and offset) 

  • Input impedance (resistance): 100 ohms 

  • Protection: Self-resetting short circuit protection fuses 

  • DMRR (differential mode) 66 db at 50/60 Hz 

  • Fastest update time [# of chan.]: 880 ms [all] -16-bit; 145 ms [all] -14-bit; 1 ms [2] -10-bit

Analog Output Channels

Analog output range: 4-20 mA, 0-20 mA, 0-5 VDC 

D/A resolution 16 bits (less than 1 uA) 

Full scale accuracy +/-0.02% (at 20°C); All ranges after calibration 

4-20mA full scale accuracy +/-0.02% (at 20°C); Before calibration 

0-20mA full scale accuracy +/-0.1% (at 20°C); Before calibration 

Span and offset temp. +/- 50 ppm per °C typ. 

Max. output settling time 5 ms (to .05%) 

Max. Load resistance (@ 24 V) 750 Ohms 

Max. Load resistance (@ 10V) 300 Ohms 

Current limiting short circuit protection 

0-5VDC full scale accuracy +/-0.5% (at 20°C); Before calibration 

Min. load resistance (0-5VDC range): 20 KOhms

​​Configuration

  • Configured using Crimson® 3.x software

  • Graphical User Interface (GUI)

Related products