Industrial RTU 8M NVRAM 512M DRAM

Description

Performance Specifications

• Industrial PowerPC (32 bit data bus)
• Operating system: embedded LINUX
• Dynamic memory (RAM): 512 MB (478 MB Available)
• Program memory (Flash): 512 MB (272 MB for application data and programs)
• Data Logging Memory RAM: 8 MB (Battery backed)
• Datalogging: Sixnet SixLog or Red Lion Workbench
• IEC 61131 Programming: Red Lion Workbench (Sixnet ISaGRAF is supported for backward compatibility)

   

Power Input

• Input Voltage: 10-30 VDC
• Steady Input Current: 150 mA @ 24 V (6.2 W max.)
• Inrush: 3.0 A / 60 μs @ 24 VDC
• BTU/HR: 12.29

   

Switch Properties

• Operation: Unmanaged
• Number of MAC Addresses: 2
• IEEE Compliance: 802.3u, 802.3x
• Protocols: TCP/IP, ARP, UDP, IGMP, DHCP, Modbus UDP/TCP, Sixnet UDR, Modbus
• ASCII/RTU
• Latency (typical): 10 Mbps: 16 μs, 100 Mbps: 5 μs
• Switching Method: Store-and-Forward
• Maximum Throughput: 90 Mbps (Network 2)
• MDIX Auto Cable Sensing
• Auto Sensing Speed and Flow Control
• MTBF: >820,000 hours per MIL-HNDBK-217F2

   

Connectors

• Ethernet Ports
  • Independent Networks with Unique MAC & IP Addresses
  • Network 1 Port: One (1) shielded 10/100Base-T(X) port
  • Network 2 Ports: Five (5) shielded 10/100Base-T(X) ports

• Serial Ports
  • Supports speeds up to 115,200 baud
  • RS-232 (Port A): RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND)
  • RS-232 (Port B): RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND)
  • RS-485 (Port C): Screw block (485+, 485-, GND) 2- wire half-duplex half-duplex, isolated 1,500 Vrms
  • RS-232 (Port D): Screw block (TD, RD, RTS, CTS, GND) isolated 1,500 Vrms
  • USB Port: Type B for diagnostics only

     

Network Media

• 10BaseT: >Cat3 cable
• 100BaseTX: >Cat5 cable

   

Recommended Wiring Clearance

• Front: 3″ (7.62 cm)
• Top: 2.5″ (6.35 cm)

   

Environmental

• Operating Temperature Range: -40 °C to 70 °C
• Storage Temperature: -40 °C to 85 °C
• Operating Humidity: 10% to 95% (non-condensing)
• Operating Altitude: 0 to 2,000 ft.
• Shock: IEC60068-2-6; Half Sine, 31 G, 11 ms duration
• Vibration: IEC60068-2-27; 9-200 Hz 2 G, 200-500 Hz 1.5 G

   

Certification & Compliance

• Hazardous Locations: ISA12.12.01, CSA C22.2/213, Class 1, Division 2 Groups A, B, C, D
• Electrical Safety: UL 508, CSA C22.2/142, IEC61010-1, CE
• EMI Emissions: FCC part 15, ICES-003, Class A, EN61000-6-4, CE
• EMC Immunity: EN61000-6-2, CE
• Flammability: UL 94V-0 materials

   

ATEX (Zone 2)

• Protection string:  II 3 G Ex ec IIC T4 X
• Ambient temperature range: -20 °C ≤ Tamb ≤ 65 °C
• Use field wiring with insulation rated to at least 105 °C
• Standards evaluated for ATEX: IEC 60079-0 Edition 7.0, IEC 60079-7 Edition 5.1
• The equipment shall be installed in an enclosure that provides a degree of protection

  not less than IP54 in accordance with EN/IEC 60079-7 and used in an environment

  of not more than Pollution Degree 2 in accordance with EN/IEC60664-1 when

  applied in Zone 2 environments. The enclosure must be accessible only by the use

  of a tool.

   

Mechanical

• Case Dimensions:
  • Height: 3.17″ (8.05 cm)
  • Width: 4.75″ (12.07 cm)
  • Depth: 3.00″ (7.62 cm)

• Weight: 0.75 lbs (0.34 kg)
• Mount: DIN rail 35 mm or flat panel mount